Brief Overview

An entrepreneur, intending to set-up a factory involving any manufacturing process as defined under section 2(k) of the Factories Act, 1948; other than manufacturing process defined under section 2 (cb) of the said Act, is required to obtain previous permission of the State Government or the Chief Inspector of Factories in writing for the site on which the factory is to be situated and for construction or extension of factory building, installation of machinery, prime movers and/ or connection of electrical power and also for registration and licensing of the factory for the purpose of the said Act.

Overall process flow for the service

(a)Diagrammatic Form:

(b)Description of the sequence of steps depicted in the above diagram

The process flow consist of two stages, viz,
(1) Approval of plans and (2) Registration and Licencing

Stage: 1

1. An entrepreneur shall apply in prescribed form along with documents mentioned in items 7 (1) below to the Chief Inspector of Factories, Assam, Guwahati – 40
2. Submitted documents and drawings shall be examined and processed
3. If permission for the site is granted then one set of approved drawings shall be issued for construction of buildings, installation of machineries, etc. as per plans and specification
4. If permission is rejected, fresh/corrected documents shall be sought for resubmission

Stage: 2

1. The entrepreneur shall apply for licencing and registration in prescribed form along with documents mentioned in items 7 (2) below
2. Verification of application
3. If granted then licence shall be issued
4. If objection arises then resubmission of corrected documents shall be sought for

Forms to be filled

Prescribed form No. 1 and Form No.2 each in triplicate and signed by the applicant.

Guidelines for filling up the form

1. All the columns must be filled in ink in block letters or neatly typed and no column should be left blank
2. Address should be clear and complete with pin code
3. Manufacturing process should be specified in detail
4. Exact number of persons employed and amount of power (HP) connected/ used should be indicated
5. Manager may be any person appointed by the occupier/ licensee for the purpose of the Act. When no person is appointed as manager, the occupier shall be deemed to be manager for the purpose of the Act
6. Only the occupier / licensee’s particulars may be entered against specified category indicated in item no. 8 of Form No. 2
7. Owner’s detail as per land/ building/ flat documents attached with the application may be entered
8. Details of documents in support of entries against item No. 10 (a) and 10 (b) of Form No. 2
9. Details of exact amount of fees as per schedule and the mode of payment should be entered
10. Signature with Mobile No. of Occupier/ licensee and manager in full (with seal if available) to be affixed in appropriate spaces provided for the same. These signatures shall be subjected to verification for all future correspondences.

Eligibility Criteria

An occupier / Licensee should have the following eligibility

1. In case of proprietorship: Proprietor
2. In case of partnership: Any one of the partners
3. In case of Public Ltd Co. : Any one of the Directors
4. In Case of Pvt. Ltd Co.: Anyone of the shareholders
5. In Case of Pvt. Ltd Co.: Anyone of the shareholders

1. If any person named against any of the categories is minor, the fact should be clearly stated
2. In case of category (C) or (D) above if a managing agent has been appointed as occupier under the Indian Companies Act 1956 (1 of 1956) information only of that person should be furnished

Fees including the payment mode

Every application shall be accompanied by a treasury receipt in original, showing that the appropriate amount of fee has been paid into the local treasury under the head of Account “0230, Labour and Employment, 104 – Fees realised under the Factories Act,

Accompanying documents required

1) Stage – 1: Approval of Plans:
(a) Form No. 1 Prescribed under Rule – 3 (in triplicate)
(b) Process Flow Diagram
(c) Brief write up on process and technology
(d) Plans in duplicate ( Blue Printed)
    (i) drawn to scale showing the site of the factory and immediate surroundings including adjacent buildings and other structures, roads drains etc.
    (ii) drawn to scale showing the plan, elevation and necessary cross- section of the various buildings, including all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plan shall also clearly indicate the position of the plant and machinery, aisles, electrical panels, switches, motors with rated H.P. etc and passage ways.
(e) NOC from local authorities in respect of non- agricultural land, forest, wet land, hills, sanctuaries etc (SDG – 15, Assam vision 2020)
(f) Clearance certificate from the controller of explosives wherever applicable.
(g) Certified true copy of executed deed of ownership/ lease/ allotment of land/ building/ flat etc.

2) Stage – 2: Registration and licencing:-
(a) Form No. 2 prescribed under Rule – 4 and Rule – 7 in triplicate
(b) Treasury Receipt in original, showing deposit of appropriate fees as per schedule A,B or C [Rule 5 – (1)]
(c) Executed Deed of Partnership in case of a firm or other association of individual and nomination of occupier/ licensee for the purpose of the Act
(d) Articles of Association and Memorandum of Incorporation in case of a company under the Indian Companies Act 1956, and list of Directors/ Shareholders and resolution of B.O.D.’s for nomination of occupiers for the purpose of the Act.
(e) Appointment letter in respect of Chief Administrative head of the unit from the concerned Ministry/ Board in case of Govt. / Local Fund as occupier for the purpose of the Act.

Important Timeline

(A) For Permission of Site,
    (a)Due date for submission: Any day during the year for which licence is applied for
    (b)Time for processing: 45 Days ( maximum)
(B) For Registration and licensing
    (a) Due Date for submission: At least 15 (fifteen) days before the occupation or use any premises as a factory.
    (b) Time for processing:- 45 Days (maximum).

How to apply

1. Make sure that you are eligible for applying (Review the eligibility checklist)
2. Complete the forms to be filled
     (i) Please check forms in documents
     (ii) Please check Guidelines for filling form at forms in documents
     (iii) Please click here to go to forms in documents
3. Ensure that you attach the relevant documents
4. Pay the requisite fees

Whom to contact for any queries

(A) For Zone – I (Tinsukia(TSK), Dibrugarh (DBR), Sibsagar (SIB), Jorhat (JOR), Golaghat(GLT))
Name: - Addl. Chief Inspector of Factories, Assam, Betkuchi,Lokhra, Guwahati – 781040, Assam
Phone No.: 
Email id: cif_assam@yahoo.co.in, cif.labour.assam@gov.in

(B) For Zone – II ( Nagaon (NAG), Morigaon (MRG), Cachar (CAC), Karimganj (KAR), Hailakandi (HLK), Karbi Anglong (KBA) North Cachar Hills (NCH) Kamrup (KAM) and Goalpara (GOA) )
Name: Addl. Chief Inspector of Factories, Assam,Betkuchi,Lokhra,Guwahati-781040,Assam
Phone: 
Email id: cif_assam@yahoo.co.in, cif.labour.assam@gov.in

(C)For Zone – III ( Dhubri (DHU) Kokrajhar (KOK) Bongaigaon (BNG) Chirang (CHI) Udalguri (UDA) Sonitpur (SON) Lakhimpur (LAK) Dhemaji (DHM) Darrang (DAR) )
Name: Addl. Chief Inspector of Factories, Assam, Betkuchi,Lokhra,Guwahati-781040, Assam
Phone: : 
Email id: cif_assam@yahoo.co.in, cif.labour.assam@gov.in

Whether the service is offline or online

As of now, the service is online in the Office of the Chief Inspector of Factories, Assam, NPS International School Lane, Betkuchi, Lokhra, Guwahati-781040, Assam.